Issue:  Moving from older MacBook Pro with USB interfaces to new MacBook Pro with only USBC interfaces.
        USBC to USB to console adapter does not create /dev/cu.SLAB_USBtoUART and /dev/tty.SLAB_USBtoUART
        automatically when connected as before.


Working Hardware:  MacBook Pro
Working Software:  OS X El Capitan Version 10.11.6
Working Cable:     http://www.hardkernel.com/main/products/prdt_info.php?g_code=G134111883934


USB-UART Module Kit

for  ODROID boards

System console interface board for platform development and debugging.
This module kit is easiest way ever to connect to your ODROID serial console port. 

CP2104: USB to Serial UART bridge IC with 1.8~3.3V interface

Molex5268-04 connector and cable assembly

Please check the WiKi for more technical information and setup.

WiKi : https://wiki.odroid.com/accessory/development/usb_uart_kit







Odroid

casanova-odroid-usbc-to-serial-console-pic.jpg

Working with direct conection to USB on older MAC

working-dmesg-using-silabs-driver.png

cu and TTY automatically show up on older MAcBook with direct USB connection

cu_and_tty_show_up_in-dev-dir.png

screen

cmd-to-use-console-screen-tty.SLAB_USBtoUART-115200.png

Working console on MacBook with direct USB

odroid-usb-console.png

Working Case - driver information

working-macbook-pro-El-Capitan-Version-10.11.6-silabs-driver.png

 NOT WORKING 

usb-to-usbc-adaptor-dmesg-not-working.txt